ZinCo Concrete Kerb, leg length approximately / approx. 25 x 30 cm
Concrete corner stone for edging planting areas, defining / bordering pavements and patios or forming planters, etc.; contains 80 % sand from concrete processing.
L = approximately / approx. 50 cm, usable on both sides, weight 28.5 kg/piece (efflorescence and permissible dimensional tolerances are possible)
| Order Nr.: | 5025 |
|---|---|
| Material: | Normal concrete |
| Length [mm]: | 500,0 |
| Packaging unit: | Piece |
| Weight [kg]: | 28,5 |
| Leg length [mm]: | 250 x 300 |
| Additional info: | Leg thickness at the ends: approximately / approx. 45 mm each |
Shaped kerbs made of eco-concrete, leg lengths approx. 250 / 300 mm, length approx. 500 mm, weight approx. 28.5 kg, supply and install according to design plan, including corner formations and fitting pieces.
Make: Zinco "Concrete Concrete Kerb"
Unit: m
Order Nr.: 5025
These Installation Instructions describe the essential steps for using these products. Please also observe the relevant standards and guidelines, in particular the occupational health and safety regulations.
Installation:
The concrete angle blocks are set directly into concrete or mortar on the drainage element.
The concrete shaped kerbs are usable on both sides, so it is up to you to decide how to set them up.
The inside and outside corners, each consisting of two 45° angles, are not usable on both sides, but must be ordered for the corresponding height; they are also set directly into concrete or mortar on the drainage element.
The stainless steel cover is suitable for both types of installation and is simply pushed onto the concrete angle blocks from above. The stainless steel cover can be cut to size using a standard angle grinder with a metal disk. Beware of flying sparks when cutting (fire hazard, risk of injury, etc.). It is also important that the sharp edges are deburred after cutting.