Zinco Sedum Cuttings, mixture of at least 4 different species. Species, not storable.
Shoot tips of various sedum species; suitable for sowing as shoots for simple extensive planting on shallow and slightly sloping roofs.
separated shoot parts of proven sedum species, recommended application rate from 60 g/sqm, available in full kg quantities only. Please note the sowing rates recommended in the "PLANT LISTS" depending on the roof slope! The ideal sowing times are late spring and fall. Please also note our handling instructions for this and for storage.
| Order Nr.: | 8020 |
|---|---|
| Material: | cut plant parts |
| Length [mm]: | 20-50 |
| Packaging unit: | Sack |
| Weight [kg]: | 1,0 |
| Additional info: | Quantity to be spread: approx. 60-80 g/m²; delivery options in raschel bags: 2-10 kg each |
Sedum shoots, at least 4 different species according to Zinco plant list "Sedum Carpet", supply, apply and roll on professionally, incl. first watering.
Product: Zinco "Sedum sprouts"
Unit: m²
Order Nr.: 8020
Please observe the following notices to ensure your greening success:
- Remove all transport packaging immediately upon receipt and check that the goods are intact. Note any complaints on the freight document, have them confirmed by the carrier and inform us on the same day.
- The Sedum Cuttings are to be spread at short notice. If storage is necessary, this is possible in a cool, dry place for a maximum of one day. Spread the sprouts on damp newspaper.
- Before spreading, the sprouts must not be exposed to direct sunlight or stored in a wind-exposed position due to the associated drying out.
- Ideal application temperature 15 to 18 °C. Higher temperatures or wind increase the water requirement; lower temperatures delay development
- Sow as dry seed on ZinCo System Substrate. The sprouts should be pressed down. Good soil contact promotes growth.
- After sowing the sprouts, the Area should be thoroughly watered. To ensure growth, the Area should be kept shallow for a period of 4 to 6 weeks after completion.
- ZinCo Plantfit 4 M is recommended for fertilization in the course of completion, development and maintenance care, taking into account the dosing instructions.
If you have any questions, please contact the ZinCo hotline, Phone 07022 9060-770.