Zinco Georaster for pitched roofs, height 10 cm, 54 x 54 cm, = 2.56 pieces per m²
Grid elements made of RC plastic, suitable for use in green roofs on pitched roofs, for reinforcement of surfaces, for slope stabilization, etc.
Order Nr.:
3401
Product information "Zinco Georaster for pitched roofs, height 10 cm, 54 x 54 cm, = 2.56 pieces per m²"
HDPE panels with a reinforced center rib and T-plug connections, grid dimension of 62.5 cm, weight of 2.2 kg per panel, stackable, with special mounts for Dripperlines.
| Order Nr.: | 3401 |
|---|---|
| Colour: | black |
| Material: | Recycled polyethylene |
| Length [mm]: | 540 |
| Width [mm]: | 540 |
| Height [mm]: | 100 |
| Packaging unit: | Piece |
| Weight [kg]: | 2,2 |
| Additional information: | Grid dimension approx. 625 mm, shear strength 8 kN/m, stackable, with special mounts for Dripperlines |
Grid elements made of HD-PE for the greening of pitched roofs, with reinforced center rib and snap-in T-plug connections, can be used up to approx. 40° roof slope, height approx. 100 mm, element size approx. 540 x 540 mm, grid dimension laid 625 mm, stockable, with special mounts for drip hoses, deliver and install over the entire surface as structural reinforcement of the layered structure in accordance with the manufacturer's instructions. The support on the shear protection must be backed with pressure-distributing strips (e.g. EL 202).
Product: Zinco "Georaster®"
Unit: m²
Order Nr.: 3401
Product: Zinco "Georaster®"
Unit: m²
Order Nr.: 3401
This product has accessories
Grid elements made of RC plastic, suitable for use in green roofs on pitched roofs, for reinforcement of surfaces, for slope stabilization, etc.
Grid elements made of RC plastic, suitable for use in green roofs on pitched roofs, for reinforcement of surfaces, for slope stabilization, etc.
Zinco Dripperline 100-L1, 200-meter roll, Dripperline Ø approx. 16 mm
Durable Dripperline with integrated, pressure-compensating drippers spaced 100 mm apart.
Durable Dripperline with integrated, pressure-compensating drippers spaced 100 mm apart.