Zinco Plant Mat Sedum Carpet, pre-cultivated Vegetation Mats
Mats pre-cultivated with sedum species or additionally with herbs for rapid coverage, especially for more sloping or wind-exposed areas.
on a degradable carrier, with at least 4 different sedum species or varieties; vegetation mats are living plant material, therefore a large amount of heat is generated in the pallet. Upon receipt of the vegetation mats, the packaging film must be removed immediately Pallets must be placed in the shade. The vegetation mats must be installed on the day of delivery. Properties (z. B. thermal) according to the FLL guidelines, total coverage min. 75 % projective, foreign vegetation with coverage max. 20 %, partial areas without filling substrate up to max. 30 cm², the planting mat shrinks approximately / approx. 5 % after installation.
| Order Nr.: | 8030 |
|---|---|
| Length [m]: | 2,0 |
| Material: | Plants grown in System Substrate / Substrate Soil / Growing Medium, decomposable carrier insert |
| Width [m]: | 1,0 |
| Thickness [mm]: | 30-40 |
| Packaging unit: | Mat |
| Weight [kg/m²]: | 16-20 |
| Additional info: | Delivery: min. 2 m² |
cultivated on a degradable carrier layer, deliver and install professionally on the vegetation substrate, including thorough irrigation of the entire layer structure.
Product: Zinco "Sedum Carpet" plant mat
Unit: m²
Order Nr.: 8030
Please observe the following notices to ensure successful planting:
- Remove all transport packaging immediately upon receipt and check that the goods are intact. Note any complaints on the freight document, have them confirmed by the carrier and notify us on the same day.
- The plant mats must be installed immediately upon receipt. Mats that are still rolled/folded must be stored in a shaded position until they are laid. Storage in a folded or rolled state leads to decomposition of the vegetation.
- The mats must be unloaded and transported carefully within the construction site. System Substrate / Substrate Soil / Growing Medium and plant parts will come loose if the mats sag or twist.
- The mats are laid butt to butt on the prepared substrate surface. The mat must rest on the System Substrate / Substrate Soil / Growing Medium at every point without cavities. Butt joints and any bare patches on the mat surface must be filled with System Substrate and Sedum Cuttings or seed. After the mats have been laid, they should be rolled down to ensure that the roots are well embedded in the soil.
- If the plant mats are laid in frost, no warranty can be given. Unfolding/rolling frozen mats will damage the vegetation.
- After laying the plant mat, the area must be thoroughly watered. To ensure growth, the Area should be watered as required for a period of 4-5 weeks after completion, making sure that irrigation is extensive and penetrating and that the mats are allowed to dry out significantly between each watering.
- ZinCo Plantfit® 4 M is recommended for fertilization in the course of development and maintenance care, observing the dosing instructions. Apply ZinCo Plantfit® below the plant mats as a starter fertilizer.
Final notices:
If you have any questions, please contact the ZinCo hotline, Phone 07022 9060-770