Dam-up Plate AS 13 for use under the Retention Run-off Limiter RS 28
Dam-up Plate for creating a backflow in combination with the Retention Run-off Limiter RS 28, made of polyethylene with rubberised underside gasket / waterproofing made of cellular rubber.
Order Nr.:
4003
Product information "Dam-up Plate AS 13 for use under the Retention Run-off Limiter RS 28"
Dam-up Plate for creating a dam in combination with the RS 28 Retention Run-off Limiter; made of polyethylene with rubberised underside gasket / waterproofing made of cellular rubber, total height 13 mm, dimensions / measurements 280 x 280 mm. Up to 5 discs can be arranged on top of each other.
| Order Nr.: | 4003 |
|---|---|
| Material: | Polyethylene with rubberized underside gasket / waterproofing made of cellular rubber |
| Length [mm]: | 280,0 |
| Width [mm]: | 280,0 |
| Height [mm]: | 13,0 |
| Packaging unit: | Piece |
These Installation Instructions describe the essential steps for using this product. Please also observe the relevant standards and guidelines, in particular the occupational health and safety regulations.
In combination with the Retention Run-off Limiter RD 28 (Order No. 4000), the Dam-up Plate AS 13 (Order No. 4003) can be used to create an accumulation. The Dam-up Plate AS 13 must be positioned above the flat roof outlet under the Retention Run-off Limiter RD 28. Up to five Dam-up Plates AS 13 can be arranged one above the other. If there are several roof outlets, the backwater level must be the same for all backwater elements. In the winter months, the baffle plates must be removed and the Retention Run-off Limiter RD 28 placed at the bottom.
In combination with the Retention Run-off Limiter RD 28 (Order No. 4000), the Dam-up Plate AS 13 (Order No. 4003) can be used to create an accumulation. The Dam-up Plate AS 13 must be positioned above the flat roof outlet under the Retention Run-off Limiter RD 28. Up to five Dam-up Plates AS 13 can be arranged one above the other. If there are several roof outlets, the backwater level must be the same for all backwater elements. In the winter months, the baffle plates must be removed and the Retention Run-off Limiter RD 28 placed at the bottom.
1. Accumulation and throttle element
2. Temporary retention storage space
3. Periodically plant-available backwater
2. Temporary retention storage space
3. Periodically plant-available backwater