Zinco Elastodrain EL 202, slabs 1 x 1 m, approx. height 19 mm
Extremely heavy-duty / extremely high loadable protection and Drainage Mat; preferably for use under Driveways, fire department access roads and parking areas etc.
Stud height 12 mm, heavy-duty drainage and building protection mat with unilaterally high load studded edge and rebated subsonic edge, trafficable, spade resistant, bitumen resistant, subsonic noise reduction / insulating subsonic edge, Shore hardness 75 Shore A, static foundation support module approx. 285 MN/cbm, solid rubber, weight approx. 20 kg/sqm
| Order Nr.: | 3220 |
|---|---|
| Colour: | black |
| Length [m]: | 1,0 |
| Material: | fully vulcanized rubber |
| Width [m]: | 1,0 |
| Height [mm]: | 19,0 |
| Packaging unit: | Board |
| Weight [kg/m²]: | 19,0 |
| Stud height [mm]: | approx. 12 |
| Number of studs [m²]: | approx. 1200 |
| Pressure [kN/m²]: | 10% = 400 |
| Shore hardness [Shore A]: | approx. 75 |
| Water runoff at sheet level at roof slope 1 % [l/(s-m)]: | 0,34 |
| Water runoff at sheet level at 2% gradient / incline [l/(s-m)]: | 0,47 |
| Water runoff at sheet level at 3% gradient / incline [l/(s-m)]: | 0,57 |
| Compatible with bitumen: | yes |
| Additional information: | static foundation support module approx. 285 MN/m³; heat resistant up to 200° C, short-term up to > 250° C |
heavy-duty / extremely high load bearing, made of solid rubber with unilaterally studded structure, height 19 mm, stud height 12 mm, with rebated edge, can be joined with 2-hole connectors, trafficable, spade resistant, bitumen resistant, subsonic noise reduction / insulating subsonic noise, shore hardness approx. 75 Shore A, static foundation support module 285 MN/m³, Weight approx. 19 kg/m², water drainage capacity tested according to EN ISO 12958: approx. 0.34 l/s*m at a gradient of 1 %, approx. 0.47 l/s*m at a gradient of 2 %, deliver and install according to manufacturer's instructions.
Product: ZincoElastodrain® "EL 202"
Unit: m²
Order Nr.: 3220
Elastodrain® EL 202 slabs must always be laid with the studs facing upwards. The slabs must be aligned in such a way that the upper overhanging seam can always be placed on the lower overhanging seam of the neighboring slab.
If the Elastodrain® boards are to be driven over, e.g. to apply the System Substrate / Substrate Soil / Growing Medium, it is advisable to secure them against slipping with two fasteners per joint beforehand.
This product has accessories
Extremely heavy-duty / extremely high loadable protection and Drainage Mat; preferably for use under Driveways, fire department access roads and parking areas etc.