Zinco PV module middle clamp aluminum natural for module frame height from 30 mm to 40 mm
Order Nr.:
9739
Product information "Zinco PV module middle clamp aluminum natural for module frame height from 30 mm to 40 mm"
Variable module Middle clamps, pre-assembled with threaded plate and screw, for framed modules from 30 to 40 mm frame height, quick installation by simply snapping into the mounting profile
| Order Nr.: | 9739 |
|---|---|
| Colour: | Aluminium nature |
| Material: | extruded aluminium AlMgSi 0.5 |
| Height [mm]: | 30-40 |
| Packaging unit: | Piece |
| Weight [g]: | 50,0 |
Variable module Middle clamps, pre-assembled with threaded plate and screw, for framed modules from 30 to 40 mm frame height, quick installation by simply snapping into the mounting profile.
Make: Zinco PV module middle clamp
Unit: pcs
Order Nr.: 9739
These Installation Instructions describe the essential steps for using this product. Please also observe the relevant standards and guidelines, in particular the occupational health and safety regulations.
Two Middle Clamps are required per module joint. The Middle Clamp is used for two adjoining PV modules. It is fastened on the wide side of the SMP. Place the notch with the rubber on the edge of the profile and press forward until the Clamp engages.
Mount and align the solar modules.
Tighten all bolts with 6 to 9 Nm.
Tighten all bolts with 6 to 9 Nm.
This product is accessories from
Zinco SMP 38/33 Solar Mounting Profile for Installing Modules / Collectors
SMP 38/33 solar mounting profile made of extruded natural aluminium AlMgSi 0.5, F25, extrusion-finished, with profile channels on the top and rubberised underside.
SMP 38/33 solar mounting profile made of extruded natural aluminium AlMgSi 0.5, F25, extrusion-finished, with profile channels on the top and rubberised underside.