Zinco Dripperline 500-L2 roll of 100 m,Dripperline Ø approx.16.6 mm
Robust Dripperline with integrated, pressure-compensating drippers at 500 mm intervals.
Dripperline, with integrated drippers at intervals of approximately 500 mm, dripper capacity approximately / approx. 2.0 l/h, pressure-compensating, for the irrigation of extensive green roofs in conjunction with the Aquafleece AF 300.
| Order Nr.: | 935000 |
|---|---|
| Length [m]: | 100,0 |
| Material: | Hose and dripper: Polyethylene, Membrane: Silicone |
| Packaging unit: | Role |
| Additional info: | Hose diameter outside approx. 16.6 mm / inside approx. 14.2 mm; dripper spacing approx. 500 mm; dripper capacity approx. 2.0 l/h. |
Dripperline with internal drippers for the irrigation of Green Roofs, hose diameter outside approx. 16.6 mm, hose diameter inside approx. 13.7 mm, dripper spacing approx. 500 mm, dripper capacity approx. 2 l/h, pressure-compensating between 0.4 and 3.0 bar, with long-lasting root penetration protection due to stable / durable inhibitor, supply and fix to the Aquafleece AF 300 with hook and loop tape at approx. 50 cm intervals according to specifications.
Make: Zinco "Dripperline 500-L2"
Unit: m
Order Nr.: 935000
These Installation Instructions describe the essential steps for using this product. Please also observe the relevant standards and guidelines, in particular the occupational health and safety regulations.
The Dripperline 500-L2 and the hook and loop tape are part of the "Urban Climate Green Roof" and "Irrigated Extensive Green Roof" system structure and can only be used in conjunction with the Aquafleece AF 300.
1
Installation:
The Dripperlines are laid parallel to each other at a distance of 50 cm on the Aquafleece AF 300 and fixed in place with the Velcro strips (quantity as required)*
2
Cutting:
The Dripperlines can be cut with a cutter knife.
When cutting, make sure that the already laid layers are not damaged under any circumstances! If damage does occur, it must be reported and repaired immediately.
Final notes:
* To construct a complete irrigation system, additional elements such as supply lines, irrigation lines and connectors are required. We will be happy to help you with the planning and determination of requirements.
This product is accessories from
Robust Dripperline with integrated, pressure-compensating drippers at 500 mm intervals.
1. during irrigation, the water is distributed over the surface due to capillarity and
2. after water saturation, precipitation can pass through (almost) unhindered
Protected by utility model in Germany!
This product has accessories
Robust Dripperline with integrated, pressure-compensating drippers at 500 mm intervals.