Zinco Floraset FS 50 board 1 x 1 m, approx. height 50 mm
Inexpensive drainage element made of expanded polystyrene foam for use with extensive planting on roofs with and without gradients / inclines and on slightly sloping roofs.
Drainage element made of rigid expanded polystyrene foam, manufactured without CFCs or HBCD, featuring water storage troughs / cells, openings for diffusion, and a rubberised underside drainage channel system; compressive strength at 10% compression is approx. 45 kN/sq m, Weight per unit area of approx. 0.6 kg/sq m, as a component of a system design with an Environmental Product Declaration (EPD).
| Order Nr.: | 3052 |
|---|---|
| Colour: | white |
| Length [m]: | 1,00 |
| Material: | EPS |
| Width [m]: | 1,00 |
| Height [mm]: | 50,00 |
| Packaging unit: | Board |
| Weight [g/m²]: | approx. 600.00 |
| Pressure [kN/m²]: | 10% = 45 |
| Water storage capacity [l/m²]: | 3 * |
| Water runoff at sheet level at roof slope 1 % [l/(s-m)]: | 0,63 |
| Water runoff at sheet level at 3% gradient / incline [l/(s-m)]: | 0,92 |
| Water discharge at 10% gradient / incline [l/(s-m)]: | 2,11 |
| Compatible with bitumen: | yes |
| UV-stabilized / protected against UV light: | no |
| Additional information: | Apparent density: approx. 20 kg/m³; Filling volume when installed with the studs facing up: max. approx. 10 l/m²; * = when installed with the large studs facing down |
Made of expanded and profiled rigid polystyrene foam, CFC-free and HBCD-free, height approx. 50 mm, featuring water storage troughs / cells and openings for ventilation and diffusion, as well as a multidirectional channel system on the rubberised underside; weight per unit area approx. 0.6 kg/m²; compressive strength up to approx. 45 kN/m²; water drainage capacity tested according to EN ISO 12958: roof slope 1 %—approx. 0.63 l/s*m, roof slope 2 %—approx. 0.92 l/s*m; as a component of a system configuration with an Environmental Product Declaration (EPD) in accordance with the manufacturer’s instructions.
Brand: ZincoFloraset® "FS 50"
Unit: m²
Order Nr.: 3052
Installation should not be carried out if there is a risk of storms.
Installation:
Floraset® FS 50 slabs are laid butt-jointed, i.e. without overlapping and with the studs facing downwards.*
After installation, the drainage elements must be covered immediately with a Filter Sheet. Both must be covered immediately after installation to protect against UV radiation and blowing away.
Cutting:
The Floraset® slabs can be cut with an (electric) foxtail. When cutting, make sure that the already laid layers are not damaged under any circumstances! If damage does occur, it must be reported and repaired immediately.
The drainage elements must be cut out in a circle above roof outlets, approx. 10 mm larger than the roof outlet on all sides.
* On flat roofs, the element is laid with the studs facing downwards, for applications on pitched roofs with the studs facing upwards.
This product is also available in other dimensions / measurements / specifications
Inexpensive drainage element made of expanded polystyrene foam for use with extensive planting on roofs with and without gradients / inclines and on slightly sloping roofs.