Zinco Inspection Chamber KS 30/30 stainless steel, height 30 cm
Inspection Chamber made of high-quality stainless steel for securing and checking outlets within intensively greened roof areas.
Outer dimension of the chamber approx. 30 x 30 cm, aperture dimension approx. 24 x 24 cm, can be walked on and closed, with all-round drainage slots, made of Stainless steel, with height-adjustable foil sleeve, weight approx. 4 kg/piece
| Order Nr.: | 4035 |
|---|---|
| Colour: | Stainless steel nature |
| Material: | Stainless steel |
| Height [mm]: | 300,0 |
| Packaging unit: | Piece |
| Weight [kg]: | 4,00 |
| Outer dimension of the chamber [mm]: | 300 x 300 |
| Aperture dimension [mm]: | 240 x 240 |
made of Stainless steel, height approx. 30 cm, removable, lockable cover, with pressure-distributing contact surfaces, outer dimensions of the chamber approx. 30 x 30 cm, aperture dimensions approx. 24 x 24 cm, with all-round drainage slots, stable, walkable Contractor, with pressure-distributing contact surfaces and moveable / slideable foil sleeve for seamless connection / connector to the Filter Sheet, weight approx. 4 kg/each, supply and install over the roof outlets.
Product: Zinco Inspection Chamber "KS 30/30-E"
Unit: pcs
Order Nr.: 4035
Inspection Chambers protect outlets from contamination and ensure easy access for inspection and maintenance.
Installation of Inspection Chamber:
Before installation, the flanges of the Inspection Chamber must be pulled out in the direction of the arrow until they click into place. An Inspection Chamber is then placed above each roof outlet, usually directly on the drainage element. All layers in the diameter of the outlet are cut out beforehand. A cross cut is not sufficient for this.
The Filter Sheet is laid over the Inspection Chamber and cut out so that the slots of the Inspection Chamber remain free, but the two flanges are covered. The size of the opening to be cut out is approximately / approx. 30 cm × 30 cm.
For single-layer greening, the Inspection Chamber is laid directly on the protective mat.
If extension pieces (KSA 8/30 or KSA 20/30) are used, the cover, lid or metal grate / grid of the Inspection Chamber is removed for installation, the required number of extension pieces are fitted and the cover, lid or metal grate / grid is placed back on the Inspection Chamber (max. height approx. 60 cm). As an alternative to the slotted cover, the fillable or greenable lid (ArtAfter inserting the cover, lid and tightening the screws, fill in the System Substrate / Substrate Soil / Growing Medium and insert the vegetation if necessary.
A gravel strip approximately / approx. 30 cm wide is placed around the Inspection Chamber. This prevents slippage and the ingrowth of plants and provides a visual marker.
It is advisable to apply the gravel / grit before the System Substrate / Substrate Soil / Growing Medium. When applying the gravel, the shaft can be covered with a piece of Filter Sheet to prevent debris and damage to the cover, lid.
During subsequent work, care must be taken to ensure that the Inspection Chamber is not displaced and remains in position above the roof outlet.
Installation of interlocks / locking set (only possible for Inspection Chamber with cover, lid):
When using an interlocks / locking set, this is installed in the finger holes of the cover, lid. To do this, the nuts on the back of the locking mechanism are unscrewed, the locks are inserted from above through the respective hole and aligned so that the quarter-turn of the locking mechanism grips the edge of the Inspection Chamber. Finally, the nuts are refitted from the underside of the cover, lid and tightened.
Maintenance:
The Inspection Chamber should be opened regularly as part of the greening maintenance and the outlet underneath checked. Debris must be removed to ensure proper functioning.
This product is also available in other dimensions / measurements / specifications
Inspection Chamber made of high-quality stainless steel for securing and checking outlets within intensively greened roof areas.
Inspection Chamber made of high-quality stainless steel for securing and checking outlets within intensively greened roof areas.
Inspection Chamber made of high-quality stainless steel for securing and checking outlets within intensively greened roof areas.
Inspection Chamber made of high-quality stainless steel for securing and checking outlets within intensively greened roof areas.
Inspection Chamber made of high-quality stainless steel for securing and checking outlets within intensively greened roof areas.
Inspection Chamber made of high-quality stainless steel for securing and checking outlets within intensively greened roof areas.
Inspection Chamber made of high-quality stainless steel for securing and checking outlets within intensively greened roof areas.
Inspection Chamber made of high-quality stainless steel for securing and checking outlets within intensively greened roof areas.
This product has accessories
Inspection Chamber made of high-quality stainless steel for securing and checking outlets within intensively greened roof areas.