Fallnet® SB 200-Rail "Solar and fall protection"
Zinco Solar Base SB 200, with 2 fixations
The perfect mounting substrate for photovoltaic and thermal solar power plants on flat roofs with a maximum roof slope of 5°.
The perfect mounting substrate for photovoltaic and thermal solar power plants on flat roofs with a maximum roof slope of 5°.
Zinco Solar Base SB 200-Q, for crosswise installation
The perfect mounting substrate for photovoltaic and thermal solar power plants on flat roofs with a maximum roof slope of 5°.
The perfect mounting substrate for photovoltaic and thermal solar power plants on flat roofs with a maximum roof slope of 5°.
Zinco Solar Base SB 200-4, with 4 fixations
The perfect mounting substrate for photovoltaic and thermal solar power plants on flat roofs with a maximum roof slope of 5°.
The perfect mounting substrate for photovoltaic and thermal solar power plants on flat roofs with a maximum roof slope of 5°.
Zinco Fallnet-Rail rail support SB/GB length 60 cm, pack of 5 pieces
Superimposed / extra load anchor device with horizontally mobile anchor point for short-term work with personal protective equipment on flat roofs.
Superimposed / extra load anchor device with horizontally mobile anchor point for short-term work with personal protective equipment on flat roofs.
Zinco Solar Base Frame SGR 15 Length 950 mm, heights 350/610 mm
One-piece, structurally tested aluminum base frame designed for use on Green Roofs; matched to the ZinCo Solar Base® SB 200.
One-piece, structurally tested aluminum base frame designed for use on Green Roofs; matched to the ZinCo Solar Base® SB 200.
Zinco Solar Base Frame SGR 20 Length 950 mm, heights 350/700 mm
One-piece, structurally tested aluminum base frame designed for use on Green Roofs; matched to the ZinCo Solar Base® SB 200.
One-piece, structurally tested aluminum base frame designed for use on Green Roofs; matched to the ZinCo Solar Base® SB 200.
Zinco Solar Base Frame SGR 25 Length 950 mm, heights 350/790 mm
One-piece, structurally tested aluminum base frames designed for use on Green Roofs; matched to the ZinCo Solar Base® SB 200.
One-piece, structurally tested aluminum base frames designed for use on Green Roofs; matched to the ZinCo Solar Base® SB 200.
Zinco Solar Base Frame SGR 30 Length 950 mm, heights 350/900 mm
One-piece, structurally tested aluminum base frame designed for use on Green Roofs; matched to the ZinCo Solar Base® SB 200.
One-piece, structurally tested aluminum base frame designed for use on Green Roofs; matched to the ZinCo Solar Base® SB 200.
Zinco Solar base frame set SGS 90 for vertical mounting of PV modules
The solar mounting system is matched to the ZinCo Solar Base SB 200 and consists of the SGS 90 Solar base frame set, horizontal coupling profiles and the necessary mounting accessories. Preferably bifacial PV modules (light-absorbing from both sides) are used.
The solar mounting system is matched to the ZinCo Solar Base SB 200 and consists of the SGS 90 Solar base frame set, horizontal coupling profiles and the necessary mounting accessories. Preferably bifacial PV modules (light-absorbing from both sides) are used.
Zinco Fallnet Junction Unit 90° for Fallnet SR-Rail and SB 200-Rail
Superimposed / extra load anchor device with horizontally mobile anchor point for short-term work with personal protective equipment on flat roofs.
Superimposed / extra load anchor device with horizontally mobile anchor point for short-term work with personal protective equipment on flat roofs.
Zinco Fixing rail length 2 m for Fallnet SR-Rail and SB 200-Rail
Superimposed / extra load anchor device with horizontally mobile anchor point for short-term work with personal protective equipment on flat roofs.
Superimposed / extra load anchor device with horizontally mobile anchor point for short-term work with personal protective equipment on flat roofs.
Zinco Fallnet-Rail rail support SB/GB Length: 120 cm, pack of 5 pieces
Superimposed / extra load anchor device with horizontally mobile anchor point for short-term work with personal protective equipment on flat roofs.
Superimposed / extra load anchor device with horizontally mobile anchor point for short-term work with personal protective equipment on flat roofs.
Zinco screw sets East-West Stainless steel, 1 pack, for 25 pairs of frames
For the construction of an "east-west" solar elevation, two Solar base frames are screwed fixed to a Solar Base SB 200-4 on site.
For the construction of an "east-west" solar elevation, two Solar base frames are screwed fixed to a Solar Base SB 200-4 on site.
Zinco Solar Base Frame SGR 5 Length 950 mm, heights 350/430 mm
One-piece, structurally tested aluminum base frame designed for use on Green Roofs; matched to the ZinCo Solar Base® SB 200.
One-piece, structurally tested aluminum base frame designed for use on Green Roofs; matched to the ZinCo Solar Base® SB 200.
Zinco Solar Base Frame SGR 10 Length 950 mm, heights 350/520 mm
One-piece, structurally tested aluminum base frame designed for use on Green Roofs; matched to the ZinCo Solar Base® SB 200.
One-piece, structurally tested aluminum base frame designed for use on Green Roofs; matched to the ZinCo Solar Base® SB 200.
Zinco Solar Base Frame SGR 35 Length 950 mm, heights 350/1020 mm
One-piece, structurally tested aluminum base frame designed for use on Green Roofs; matched to the ZinCo Solar Base® SB 200.
One-piece, structurally tested aluminum base frame designed for use on Green Roofs; matched to the ZinCo Solar Base® SB 200.
Zinco Solar Base Frame SGR 40 Length 950 mm, heights 350/1150 mm
One-piece, structurally tested aluminum base frame designed for use on Green Roofs; matched to the ZinCo Solar Base® SB 200.
One-piece, structurally tested aluminum base frame designed for use on Green Roofs; matched to the ZinCo Solar Base® SB 200.