Photovoltaics and green roofs
Zinco Solar Base SB 200, with 2 fixations
The perfect mounting substrate for photovoltaic and thermal solar power plants on flat roofs with a maximum roof slope of 5°.
The perfect mounting substrate for photovoltaic and thermal solar power plants on flat roofs with a maximum roof slope of 5°.
Zinco Solar Base SB 200-Q, for crosswise installation
The perfect mounting substrate for photovoltaic and thermal solar power plants on flat roofs with a maximum roof slope of 5°.
The perfect mounting substrate for photovoltaic and thermal solar power plants on flat roofs with a maximum roof slope of 5°.
Zinco Solar Base SB 200-4, with 4 fixations
The perfect mounting substrate for photovoltaic and thermal solar power plants on flat roofs with a maximum roof slope of 5°.
The perfect mounting substrate for photovoltaic and thermal solar power plants on flat roofs with a maximum roof slope of 5°.
Zinco Solar Base Frame SGR 15 Length 950 mm, heights 350/610 mm
One-piece, structurally tested aluminum base frame designed for use on Green Roofs; matched to the ZinCo Solar Base® SB 200.
One-piece, structurally tested aluminum base frame designed for use on Green Roofs; matched to the ZinCo Solar Base® SB 200.
Zinco Solar Base Frame SGR 20 Length 950 mm, heights 350/700 mm
One-piece, structurally tested aluminum base frame designed for use on Green Roofs; matched to the ZinCo Solar Base® SB 200.
One-piece, structurally tested aluminum base frame designed for use on Green Roofs; matched to the ZinCo Solar Base® SB 200.
Zinco Solar Base Frame SGR 25 Length 950 mm, heights 350/790 mm
One-piece, structurally tested aluminum base frames designed for use on Green Roofs; matched to the ZinCo Solar Base® SB 200.
One-piece, structurally tested aluminum base frames designed for use on Green Roofs; matched to the ZinCo Solar Base® SB 200.
Zinco Solar Base Frame SGR 30 Length 950 mm, heights 350/900 mm
One-piece, structurally tested aluminum base frame designed for use on Green Roofs; matched to the ZinCo Solar Base® SB 200.
One-piece, structurally tested aluminum base frame designed for use on Green Roofs; matched to the ZinCo Solar Base® SB 200.
Zinco Solar base frame set SGS 90 for vertical mounting of PV modules
The solar mounting system is matched to the ZinCo Solar Base SB 200 and consists of the SGS 90 Solar base frame set, horizontal coupling profiles and the necessary mounting accessories. Preferably bifacial PV modules (light-absorbing from both sides) are used.
The solar mounting system is matched to the ZinCo Solar Base SB 200 and consists of the SGS 90 Solar base frame set, horizontal coupling profiles and the necessary mounting accessories. Preferably bifacial PV modules (light-absorbing from both sides) are used.
Zinco screw sets East-West Stainless steel, 1 pack, for 25 pairs of frames
For the construction of an "east-west" solar elevation, two Solar base frames are screwed fixed to a Solar Base SB 200-4 on site.
For the construction of an "east-west" solar elevation, two Solar base frames are screwed fixed to a Solar Base SB 200-4 on site.
Zinco Solar Base Frame SGR 5 Length 950 mm, heights 350/430 mm
One-piece, structurally tested aluminum base frame designed for use on Green Roofs; matched to the ZinCo Solar Base® SB 200.
One-piece, structurally tested aluminum base frame designed for use on Green Roofs; matched to the ZinCo Solar Base® SB 200.
Zinco Solar Base Frame SGR 10 Length 950 mm, heights 350/520 mm
One-piece, structurally tested aluminum base frame designed for use on Green Roofs; matched to the ZinCo Solar Base® SB 200.
One-piece, structurally tested aluminum base frame designed for use on Green Roofs; matched to the ZinCo Solar Base® SB 200.
Zinco Solar Base Frame SGR 35 Length 950 mm, heights 350/1020 mm
One-piece, structurally tested aluminum base frame designed for use on Green Roofs; matched to the ZinCo Solar Base® SB 200.
One-piece, structurally tested aluminum base frame designed for use on Green Roofs; matched to the ZinCo Solar Base® SB 200.
Zinco Solar Base Frame SGR 40 Length 950 mm, heights 350/1150 mm
One-piece, structurally tested aluminum base frame designed for use on Green Roofs; matched to the ZinCo Solar Base® SB 200.
One-piece, structurally tested aluminum base frame designed for use on Green Roofs; matched to the ZinCo Solar Base® SB 200.
Zinco Solar Base Frame SGR 45 Length 950 mm, heights 350/1300 mm
One-piece, structurally tested aluminum base frame designed for use on Green Roofs; matched to the ZinCo Solar Base® SB 200.
One-piece, structurally tested aluminum base frame designed for use on Green Roofs; matched to the ZinCo Solar Base® SB 200.
Zinco height adjustment SGR-HV made of aluminium, approx. / 950 mm length
Special lower part of the frame, which is screwed fixing to the Solar Base SB 200 and into which a Solar base frame SGR is inserted from above and also screwed fixing.
Special lower part of the frame, which is screwed fixing to the Solar Base SB 200 and into which a Solar base frame SGR is inserted from above and also screwed fixing.
Zinco adapter profile for SGR length 70 cm, made of aluminium
Adapter profile made from one piece, which enables particularly large modules to be mounted on the ZinCo Solar base frame SGR. Up to two adapter profiles can be attached per SGR (one at the top and one at the bottom).
Adapter profile made from one piece, which enables particularly large modules to be mounted on the ZinCo Solar base frame SGR. Up to two adapter profiles can be attached per SGR (one at the top and one at the bottom).
Zinco wind bracing WV 5/10 Length 107 cm
A wind bracing WV consists of two pre-drilled aluminium flat profiles, for cross bracing of two Solar base frames (1 m apart); incl. Stainless steel fastening devices.
A wind bracing WV consists of two pre-drilled aluminium flat profiles, for cross bracing of two Solar base frames (1 m apart); incl. Stainless steel fastening devices.
Zinco wind bracing WV 15/20 length 116 cm
A wind bracing WV consists of two pre-drilled aluminium flat profiles, for cross bracing of two Solar base frames (1 m apart); incl. Stainless steel fastening devices.
A wind bracing WV consists of two pre-drilled aluminium flat profiles, for cross bracing of two Solar base frames (1 m apart); incl. Stainless steel fastening devices.
Zinco wind bracing WV 25/30 Length 125 cm
A wind bracing WV consists of two pre-drilled aluminium flat profiles, for cross bracing of two Solar base frames (1 m apart); incl. Stainless steel fastening devices.
A wind bracing WV consists of two pre-drilled aluminium flat profiles, for cross bracing of two Solar base frames (1 m apart); incl. Stainless steel fastening devices.
Zinco wind bracing WV 35/40 Length 139 cm
A wind bracing WV consists of two pre-drilled aluminium flat profiles, for cross bracing of two Solar base frames (1 m apart); incl. Stainless steel fastening devices.
A wind bracing WV consists of two pre-drilled aluminium flat profiles, for cross bracing of two Solar base frames (1 m apart); incl. Stainless steel fastening devices.
Zinco wind bracing WV 45 length 150 cm
A wind bracing WV consists of two pre-drilled aluminium flat profiles, for cross bracing of two Solar base frames (1 m apart); incl. Stainless steel fastening devices.
A wind bracing WV consists of two pre-drilled aluminium flat profiles, for cross bracing of two Solar base frames (1 m apart); incl. Stainless steel fastening devices.
Zinco solar mounting profile SMP 38/33 for mounting modules / collectors
Solar mounting profile SMP 38/33 made of extruded natural aluminium AlMgSi 0.5, F25, mill finish, with profile channel on top and underside.
Solar mounting profile SMP 38/33 made of extruded natural aluminium AlMgSi 0.5, F25, mill finish, with profile channel on top and underside.
