System structure East-West Orientation "Butterfly"
Zinco Fixodrain XD 20, roll 1 x 20 m, height approximately / approx. 20 mm
Quick-to-lay, fleece-backed protection, drainage and water storage membrane for use under extensive green roofs.
Quick-to-lay, fleece-backed protection, drainage and water storage membrane for use under extensive green roofs.
Zinco Solar Base SB 200-4, with 4 fixations
The perfect mounting substrate for photovoltaic and thermal solar power plants on flat roofs with a maximum roof slope of 5°.
The perfect mounting substrate for photovoltaic and thermal solar power plants on flat roofs with a maximum roof slope of 5°.
Zinco System Substrate Sedum Carpet in BigBag, incl. freight
The "Sedum Carpet" System Substrate is especially suitable for extensive green roofs in single or multi-layer construction with the species on the "Sedum Carpet" plant list. The plants can be applied as small or root ball plants or shoots.
The "Sedum Carpet" System Substrate is especially suitable for extensive green roofs in single or multi-layer construction with the species on the "Sedum Carpet" plant list. The plants can be applied as small or root ball plants or shoots.
Zinco System Substrate Sedum Carpet loose in a tipper, incl. freight
The "Sedum Carpet" System Substrate is especially suitable for extensive green roofs in single or multi-layer construction with the species on the "Sedum Carpet" plant list. The plants can be applied as small or root ball plants or shoots.
The "Sedum Carpet" System Substrate is especially suitable for extensive green roofs in single or multi-layer construction with the species on the "Sedum Carpet" plant list. The plants can be applied as small or root ball plants or shoots.
Zinco System Substrate Sedum Carpet, in silo incl. freight
The "Sedum Carpet" System Substrate is especially suitable for extensive green roofs in single or multi-layer construction with the species on the "Sedum Carpet" plant list. The plants can be applied as small or root ball plants or shoots.
The "Sedum Carpet" System Substrate is especially suitable for extensive green roofs in single or multi-layer construction with the species on the "Sedum Carpet" plant list. The plants can be applied as small or root ball plants or shoots.
Zinco root ball plants KB 100, Sedum Carpet, slabs of 100 plants each
Sedum species pre-cultivated in the field; particularly suitable for planting thin-layered, extensive green roofs.
Sedum species pre-cultivated in the field; particularly suitable for planting thin-layered, extensive green roofs.
Zinco Sedum Cuttings, mixture of at least 4 different species. Species, not storable.
Shoot tips of various sedum species; suitable for sowing as shoots for simple extensive planting on shallow and slightly sloping roofs.
Shoot tips of various sedum species; suitable for sowing as shoots for simple extensive planting on shallow and slightly sloping roofs.
Zinco seed mixture type Solar Vert 5.0 kg
Ready-to-sow seed mixture with different low-growing species, so that solar power plants do not suffer from shading if cared for properly.
Ready-to-sow seed mixture with different low-growing species, so that solar power plants do not suffer from shading if cared for properly.
Zinco Solar Base Frame SGR 15 Length 950 mm, heights 350/610 mm
One-piece, structurally tested aluminum base frame designed for use on Green Roofs; matched to the ZinCo Solar Base® SB 200.
One-piece, structurally tested aluminum base frame designed for use on Green Roofs; matched to the ZinCo Solar Base® SB 200.
Zinco Solar Base Frame SGR 20 Length 950 mm, heights 350/700 mm
One-piece, structurally tested aluminum base frame designed for use on Green Roofs; matched to the ZinCo Solar Base® SB 200.
One-piece, structurally tested aluminum base frame designed for use on Green Roofs; matched to the ZinCo Solar Base® SB 200.
Zinco Solar Base Frame SGR 25 Length 950 mm, heights 350/790 mm
One-piece, structurally tested aluminum base frames designed for use on Green Roofs; matched to the ZinCo Solar Base® SB 200.
One-piece, structurally tested aluminum base frames designed for use on Green Roofs; matched to the ZinCo Solar Base® SB 200.
Zinco protective mat trimming SM-R roll 0.5 x 25 m, area approx. 320 g/m²
Protective mat strip made of polyester fibers designed for use in edge of roof / perimeter and connecting areas, particularly suitable for combination with Fixodrain® XD 20. Sprayed on the outside as an installation aid with pressure-sensitive adhesive; bitumen resistant, biological and biologically neutral; Thickness: approx. 3 mm; Weight: approx. 320 g/m².
Protective mat strip made of polyester fibers designed for use in edge of roof / perimeter and connecting areas, particularly suitable for combination with Fixodrain® XD 20. Sprayed on the outside as an installation aid with pressure-sensitive adhesive; bitumen resistant, biological and biologically neutral; Thickness: approx. 3 mm; Weight: approx. 320 g/m².
Zinco Solar Base Frame SGR 10 Length 950 mm, heights 350/520 mm
One-piece, structurally tested aluminum base frame designed for use on Green Roofs; matched to the ZinCo Solar Base® SB 200.
One-piece, structurally tested aluminum base frame designed for use on Green Roofs; matched to the ZinCo Solar Base® SB 200.
Zinco height adjustment SGR-HV made of aluminium, approx. / 950 mm length
Special lower part of the frame, which is screwed fixing to the Solar Base SB 200 and into which a Solar base frame SGR is inserted from above and also screwed fixing.
Special lower part of the frame, which is screwed fixing to the Solar Base SB 200 and into which a Solar base frame SGR is inserted from above and also screwed fixing.
Zinco adapter profile for SGR length 70 cm, made of aluminium
Adapter profile made from one piece, which enables particularly large modules to be mounted on the ZinCo Solar base frame SGR. Up to two adapter profiles can be attached per SGR (one at the top and one at the bottom).
Adapter profile made from one piece, which enables particularly large modules to be mounted on the ZinCo Solar base frame SGR. Up to two adapter profiles can be attached per SGR (one at the top and one at the bottom).
Zinco wind bracing WV 5/10 Length 107 cm
A wind bracing WV consists of two pre-drilled aluminium flat profiles, for cross bracing of two Solar base frames (1 m apart); incl. Stainless steel fastening devices.
A wind bracing WV consists of two pre-drilled aluminium flat profiles, for cross bracing of two Solar base frames (1 m apart); incl. Stainless steel fastening devices.
Zinco wind bracing WV 15/20 length 116 cm
A wind bracing WV consists of two pre-drilled aluminium flat profiles, for cross bracing of two Solar base frames (1 m apart); incl. Stainless steel fastening devices.
A wind bracing WV consists of two pre-drilled aluminium flat profiles, for cross bracing of two Solar base frames (1 m apart); incl. Stainless steel fastening devices.
Zinco wind bracing WV 25/30 Length 125 cm
A wind bracing WV consists of two pre-drilled aluminium flat profiles, for cross bracing of two Solar base frames (1 m apart); incl. Stainless steel fastening devices.
A wind bracing WV consists of two pre-drilled aluminium flat profiles, for cross bracing of two Solar base frames (1 m apart); incl. Stainless steel fastening devices.
Zinco solar mounting profile SMP 38/33 for mounting modules / collectors
Solar mounting profile SMP 38/33 made of extruded natural aluminium AlMgSi 0.5, F25, mill finish, with profile channel on top and underside.
Solar mounting profile SMP 38/33 made of extruded natural aluminium AlMgSi 0.5, F25, mill finish, with profile channel on top and underside.
